IDS-108FE Industrial Ethernet Switches
8-port Compact DIN Rail Switches
- 8 x RJ45 ports with 10/100 Mbps on all ports
- Redundant dual power input 12/24/48 VDC
- Reverse polarity protection
- Fan-less design with no moving parts
- -40 to 75C industrial operating temperature support
- QoS (Quality of Service) prioritized messages
Perle IDS-108FE Industrial Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-108FE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.
These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).
IDS-108FE Industrial Ethernet Switch Features
Rugged design for harsh environments |
|
Reliable operation |
|
Real-time Ethernet performance |
|
Energy Efficient Ethernet (EEE) | Energy Efficient Ethernet (EEE) as per 802.3az. This provides power savings during idle network activity. |
Hardware & Technical Specifications: IDS-108FE Industrial Ethernet Switches
Interfaces
RJ45
- 8 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft)
- Auto-negotiation
- Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
- Ethernet isolation 1500 V
Alarm Contact
One relay output with current 0.5A@30V
Power
Dual Power Input
12/24/48VDC (9-55VDC)
Power Consumption
3.40W max
Maximum Current Consumption @24 vDC
0.06A @ 24VDC
Power Connector
7-Pin Removable Terminal Block
Overload Current Protection
2A fuse provides overload current protection
Reverse polarity protection
The positive and negative inputs can be reversed providing safe and simple power connectivity.
Switch Properties
Standards
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX/FX
- IEEE 802.3az Energy Efficient Ethernet
- IEEE 802.1p Quality of Service (QoS)
Processing Type
- Store-and-Forward
- Auto Negotiation
- Half-duplex back-pressure and IEEE
- 802.3x full-duplex flow control
- Auto MDI/MDIX
MAC Address Table Size
2K
Packet Buffer Memory
768 Kbps
Jumbo Frame Size
2048 bytes
Forward/Filtering Rate
- 14,880pps for 10Mbps
- 148,810pps for 100Mbps
Indicators
Power LED 1
This LED is green when power is applied
Power LED 2
This LED is green when power is applied
Fault LED
This LED is red when a fault is detected
RJ45 / SFP Ethernet LED
These LED is solid green for established link and bllinks green when activity is detected (per port)
Environmental Specifications
Operating Temperature Ranges
- IDS-108FE: -10 to 60°C (14 to 140°F)
- IDS-108FE-XT: -40 to 75°C (-40 to 167°F)
Storage Temperature Range
-40 to 85°C (-40 to 185°F)
Operating Humidity Range
5% to 90% non-condensing
Storage Humidity Range
5% to 95% non-condensing
Operating Altitude
Up to 3,048 meters (10,000 feet)
Chassis
Metal with an IP40 ingress protection rating
Din Rail Mountable
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Maximum Heat Output
11.594 BTU/Hr
MTBF
11705657 Hours
Calculation model based on MIL-HDBK-217-FN2 @ 25°C
Product Weight and Dimensions
Weight
0.336 Kg, 0.74 lbs
Dimensions
45 x 75 x 100mm / 1.77 x 2.95 x 3.94 Inch (W x D x H)
Packaging
Shipping Weight
336g (0.74lbs)
Shipping Dimensions
45 x 75 x 100mm / 1.77 x 2.95 x 3.94 Inch (W X D X H)
Contents Shipped
- Industrial Ethernet Switch with DIN Rail attachment
- Terminal block
- Installation guide
Standards and Certifications
Safety
UL 61010
EMC Emissions
- FCC Part 15 Class A
- VCCI Class A
- EN 61000-6-4
- ICES-003
- EN 55032
EMC Immunity
- EN 61000-6-2
- EN 61000-4-2 (ESD)
- EEN 61000-4-3 (Radiated RFI)
- EN 61000-4-4 (Burst)
- EN 61000-4-5 (Surge)
- EN 61000-4-6 (Induced RFI)
- EN 61000-4-8 (Magnetic field)
Industrial
EN 50121-4
Environmental
Other
- ECCN: 5A991
- HTSUS Number: 8517.62.0020
- 5 year Warranty
Application Diagrams
IDS-108FE Industrial Copper Switch Diagram
Mechanical drawings of IDS-108FE Industrial Gigabit Switches
Click on a part number for ordering information
Product Image
Product Description
Power Cord & Part No.
IDS-108FE Industrial Switch with 8 x 10/100Mbps RJ45 Ethernet ports. -10 to 60C operating temperature.
IDS-108FE-XT Industrial Switch with 8 x 10/100Mbps RJ45 Ethernet ports. -40 to 75C operating temperature.