IDS-105G – Industrial Gigabit Switch

6 Port Compact DIN Rail Switch

5 Port Industrial Gigabit Ethernet Switch

5 port 10/100/1000Base-T (RJ45) with 1 Gigabit fiber ports (SC/ST)
Hazardous Location and Industrial Control Equipment Certification
Corrosion resistant IP30 aluminum case
Redundant dual power input 12/24/48 VDC, 18 to 30 VAC
Overload current and reverse polarity protection
Industrial operating temperature support up to -40 to 75C

Perle Industrial-grade Ethernet Switches are designed for industrial automation, government, military, oil and gas, mining and outdoor applications.

The IDS-105G is a 6 port Industrial Gigabit Ethernet switch providing advanced performance enabling real-time deterministic network operation. It requires no configuration and will operate instantly as soon as you power it up.

The IDS-105G which comes in a variety of models with 5 copper ports plus 1 fiber port. All are rugged fanless switches that are hardened to provide superior reliability in 0 to 60°C, or harsh extended operating temperatures from -40 to 75°C.

Perle has been designing industrial hardware for serial ModBus and Profinet to Ethernet conversion environments for over 35 years and have used this expertise to design the toughest Ethernet switches on the market. Don’t trust your critical communications to commercial switch products. Perle Industrial Ethernet switches give you proven assurance that your system will keep running for years to come.

IDS-105G Industrial Gigabit Ethernet Switch Features

Rugged design for harsh environments	Corrosion resistant IP30 aluminum case UL508A Industrial Control Equipment Safety certified Hazardous locations - Class1/Div2, ATEX Class1/Zone2
Reliable operation	Fanless, no moving parts Dual power input. Connect to separate power sources for redundancy. Reverse polarity protection Overload current protection
Real-time Ethernet performance	Fast wire-speed , store and forward switching, non-blocking architecture Auto-sensing for speed and duplex Auto-mdi/mdix-crossover works with straight and crossover cables
Jumbo Frames	Supports Jumbo frames up to 10 KB
Energy Efficient Ethernet (EEE)	Energy Efficient Ethernet (EEE) as per 802.3az. This provides power savings during idle network activity.

Hardware Specifications

Power

Dual Power Input

Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.

12/24/48 VDC Nominal.(9.6 to 60 VDC)
18 to 30 VAC

Power

4-Pin Removable Terminal Block.

Connector

Grounding screw on metal chassis

Maximum Current Consumption @24 vDC

500 mA

Maximum Power Consumption @24 vDC

12.0 Watts

Overload Current Protection

Reset-able fuse provides overload current protection

Reverse polarity protection

The positive and negative inputs can be reversed providing safe and simple power connectivity.

Access Ports

RJ45

5 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V

Fiber port

1 x fixed fiber port Duplex SC or ST connector

Multimode 50/125 or 62.5/125 micron fiber cable
Single mode 9/125 micron fiber cable

Simplex (BIDI, single strand) SC connector

Multimode 50/125 or 62.5/125 micron fiber cable
Single mode 9/125 micron fiber cable

PC and UPC type patch cords supported.

Fixed Fiber Port Specs

Fiber1 Type	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm)	IEEE	Core Size (um)	Modal Bandwidth (MHz *Km)	Maximum Operating Distance
Fiber1 Type	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm)	IEEE	Core Size (um)	Modal Bandwidth (MHz *Km)	Maximum Operating Distance
MMF (Duplex SC/ST)	-9.5	-4.0	-17.0	-3.0	7.5	850	1000Base-SX	62.5	160	220 m (722 ft)
								62.5	200	275 m (902 ft)
								50	400	500 m (1,640 ft)
								50	500	550 m (1,804 ft)
								50	500	1000 m (3,281 ft)
MMF (Duplex SC/ST)	-6.0	0.0	-17.0	0.0	11.0	1310	1000Base-LX	62.5	160	2 km (1.2 mi)
MMF (Duplex SC/ST)	-6.0	0.0	-17.0	0.0	11.0	1310	1000Base-LX	50	500	1 km 3,280 ft)
SMF (Duplex SC/ST)	-9.5	-3.0	-20.0	-3.0	10.5	1310	1000Base-LX/LH	9	**	10 km (6.2 mi)
SMF (Simplex SC)	-9.0	-3.0	-20.0	-3.0	11.0	1310 / 1490 1490 / 1310	1000Base-BX-U 1000Base-BX-D	9	**	10 km (6.2 mi)
SMF (Simplex SC)	-8.0	-3.0	-22.0	-3.0	14.0	1310 / 1490 1490 / 1310	1000Base-BX-U 1000Base-BX-D	9	**	20 km (12.4 mi)
SMF (Duplex SC/ST)	-2.0	2.0	-23.0	-3.0	21.0	1310	1000Base-EX	9	**	40 Km 24.9 mi
SMF (Simplex SC)	-3.0	2.0	-23.0	-3.0	2-.0	1310 / 1490 1490 / 1310	1000Base-BX-U 1000Base-BX-D	9	**	40 Km (24.9 mi)
SMF (Duplex SC/ST)	-2.0	5.0	-23.0	-3.0	21.0	1550	1000Base-ZX	9	**	70 Km (43 mi)
SMF (Simplex SC)	-2.0	3.0	-26.0	-3.0	24.0	1510 / 1590 1590 / 1510	1000Base-BX-U 1000Base-BX-D	9	**	80 Km (50 mi)
SMF (Duplex SC/ST)	0.0	5.0	-32.0	-9.0	32.0	1550	1000Base-ZX	9	**	120 Km (74.6 mi)
SMF (Simplex SC)	-3.0	2.0	-34.0	-9.0	31.0	1510 / 1590 1590 / 1510	1000Base-BX-U 1000Base-BX-D	9	**	120 Km (74.6 mi)
SMF (Duplex SC/ST)	2.0	5.0	-34.0	-9.0	36.0	1550	1000Base-ZX	9	**	160 Km (100 mi)

* 1db/km multimode fiber cable

** as per ITU-T G.652 SMF specifications

Switch Properties

Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
Energy Efficient Ethernet (EEE) as per 802.3az.
IEEE 802.3x for Flow Control

Processing Type

Store and Forward, non-blocking architecture

MAC Address Table Size

Packet Buffer Memory

1 Mbit

Jumbo Frame Size

10 KB

Indicators

This green LED is turned on when power is applied to the power #1 input

This green LED is turned on when power is applied to the power #2 input

RJ45 Ethernet

These integrated colored LEDs indicate link, activity and speed for each port.

Fiber Link

Fiber link LED indicates Link and Data Activity

Environmental Specifications

Operating Temperature Ranges

Standard temperature models : 0°C to 60°C (32°F to 140°F).
Industrial extended temperature models : -40°C to 75°C (-40 F to 167°F)

Storage Temperature Range

Minimum range of -25°C to 70°C (-13°F to 158°F). -40°C to 85°C (-40°F to 185°F) for industrial extended temperature models

Operating Humidity Range

5% to 90% non-condensing

Storage Humidity Range

5% to 95% non-condensing

Operating Altitude

Up to 3,048 meters (10,000 feet)

Chassis

Aluminum with an IP30 ingress protection rating

Din Rail Mountable

DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.

Removable to accommodate optional Panel/Wall mount kit

Maximum Heat Output

41 BTU/Hr

MTBF

696,618 hours (without fiber module)

522,423 (with fixed fiber module)

489,383 hours (with 1 SFP slot)

385,036 hours (with 2 SFP slots)

MTBF Calculation model based on MIL-HDBK-217-FN2 @ 30 °C

Product Weight and Dimensions

Weight

0.32 Kg, 0.7 lbs

Dimensions (W x H x D)

35.5 x 111 x 138 mm, 1.39 x 4.37 x 5.43 inches

Packaging

Shipping Weight

0.47 Kg, 1.04 lbs

Shipping Dimensions

170 x 260 x 70 mm, 6.69 x 10.24 x 2.76 inches

Contents Shipped

Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide

Standards and Certifications

Safety

UL/EN/IEC 62368-1
CAN/CSA C22.2 No. 62368-1
UL 60950-1
CSA C22.2 No. 60950-1
IEC 60950-1:2005+A1:2009 and
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
CE Mark
UL508 (Industrial)

EMC Emissions

FCC 47 Part 15 Class B
ICES-0003
CISPR 22:2008/EN55022:2010 (Class B)
EN61000-6-4

EMC and Immunity

CISPR 24:2010/EN 55024:2010
IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 6kV, Air Discharge +/- 8kV
IEC/EN 61000-4-3 (RS) : 80 MHz to 2.7 Ghz ; 10V/m, 800 MHz to 1000 MHz; 20V/m
IEC/EN 61000-4-4 (EFT) : DC power line +/- 2 kV, Data Line +/- 2kV
IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kV, Line/Earth +/- 2kV, Data Line line/earth +/- 1kV
IEC/EN 61000-4-6 (CS) : 150kHz to 80 MHz; 10V
IEC/EN 61000-4-8 : (Magnetic Field): 30A/m
IEC/EN 61000-6-2 (General Immunity in Industrial Environments)

Industrial Safety

UL508 (Safety standard for Industrial Control Equipment)
CSA C22.2 No. 142

Hazardous Locations (Hazloc)

ANSI/ISA 12.12.01, Class I Division 2 Groups A-D (formerly known as UL 1604)
CSA C22.2 No. 213
ATEX Class I Zone 2, EN60079-0, 15

Laser Safety

EN 60825-1
Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.

Environmental

Reach, RoHS and WEEE Compliant

Other

ECCN: 5A991
HTSUS Number: 8517.62.0020
5 year Warranty

Select a Model to obtain a Part Number – IDS-105G

Operating Temperature (Std) = 0°C to 60°C (32°F to 140°F). All Models have 5 x 10/100/1000Base-T (RJ45) Connectors
Model	Choose your Fiber Connection from the table below 1000Base-X Duplex Fiber
	Fiber Connector	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
	Fiber Connector	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
IDS-105G-M2SC05	1 x Duplex SC	-9.5	-4.0	-17.0	-3.0	7.5	850	MMF	550 m (1,804 ft)
IDS-105G-M2ST05	1 x Duplex ST	-9.5	-4.0	-17.0	-3.0	7.5	850	MMF	550 m (1,804 ft)
IDS-105G-M2SC2	1 x Duplex SC	-6.0	0.0	-17.0	0.0	11.0	1310	MMF	2 km (1.2 mi)
IDS-105G-M2ST2	1 x Duplex ST	-6.0	0.0	-17.0	0.0	11.0	1310	MMF	2 km (1.2 mi)
IDS-105G-S2SC10	1 x Duplex SC	-9.5	-3.0	-20.0	-3.0	10.5	1310	SMF	10 km (6.2 mi)
IDS-105G-S2ST10	1 x Duplex ST	-9.5	-3.0	-20.0	-3.0	10.5	1310	SMF	10 km (6.2 mi)
IDS-105G-S2SC40	1 x Duplex SC	-2.0	2.0	-23.0	-3.0	21.0	1310	SMF	40 km (24.9 mi)
IDS-105G-S2ST40	1 x Duplex ST	-2.0	2.0	-23.0	-3.0	21.0	1310	SMF	40 km (24.9 mi)
IDS-105G-S2SC70	1 x Duplex SC	-2.0	5.0	-23.0	-3.0	21.0	1550	SMF	70 km (43 mi)
IDS-105G-S2ST70	1 x Duplex ST	-2.0	5.0	-23.0	-3.0	21.0	1550	SMF	70 km (43 mi)
IDS-105G-S2SC120	1 x Duplex SC	0.0	5.0	-32.0	-9.0	32.0	1550	SMF	120 km (74.6 mi)
IDS-105G-S2ST120	1 x Duplex ST	0.0	5.0	-32.0	-9.0	32.0	1550	SMF	120 km (74.6 mi)
IDS-105G-S2SC160	1 x Duplex SC	2.0	5.0	-34.0	-9.0	36.0	1550	SMF	160 km (100 mi)
IDS-105G-S2ST160	1 x Duplex ST	2.0	5.0	-34.0	-9.0	36.0	1550	SMF	160 km (100 mi)

Operating Temperature (Ind) = -40°C to 75°C (-40 F to 167°F) All Models have 5 x 10/100/1000Base-T (RJ45) Connectors
Model	Choose your Fiber Connection from the table below 1000Base-X Duplex Fiber
	Fiber Connector	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
	Fiber Connector	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm)	Fiber Type	Operating Distance
IDS-105G-M2SC05-XT	1 x Duplex SC	-9.5	-4.0	-17.0	-3.0	7.5	850	MMF	550 m (1,804 ft)
IDS-105G-M2ST05-XT	1 x Duplex ST	-9.5	-4.0	-17.0	-3.0	7.5	850	MMF	550 m (1,804 ft)
IDS-105G-S2SC10-XT	1 x Duplex SC	-9.5	-3.0	-20.0	-3.0	10.5	1310	SMF	10 km (6.2 mi)
IDS-105G-S2ST10-XT	1 x Duplex ST	-9.5	-3.0	-20.0	-3.0	10.5	1310	SMF	10 km (6.2 mi)

* 1db/km multimode 50/125 micron fiber cable

Single Fiber (Simplex / BiDi) Models Recommended use in pairs

Operating Temperature (Std) = 0°C to 60°C (32°F to 140°F). All Models have 5 x 10/100/1000Base-T (RJ45) Connectors
Model	Choose your Fiber Connection from the table below 1000Base-X Simplex (BiDi) Fiber
	Fiber Connector	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm) TX / RX	Fiber Type	Operating Distance
	Fiber Connector	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm) TX / RX	Fiber Type	Operating Distance
IDS-105G-S1SC10U	1 x Simplex SC	-9.0	-3.0	-20.0	-3.0	11.0	1310 / 1490	SMF	10 km (6.2 mi)
IDS-105G-S1SC10D	1 x Simplex SC	-9.0	-3.0	-20.0	-3.0	11.0	1490 / 1310	SMF	10 km (6.2 mi)
IDS-105G-S1SC20U	1 x Simplex SC	-8.0	-3.0	-22.0	-3.0	14.0	1310 / 1490	SMF	20 km (12.4 mi)
IDS-105G-S1SC20D	1 x Simplex SC	-8.0	-3.0	-22.0	-3.0	14.0	1490 / 1310	SMF	20 km (12.4 mi)
IDS-105G-S1SC40U	1 x Simplex SC	-3.0	2.0	-23.0	-3.0	20.0	1310 / 1490	SMF	40 km (24.9 mi)
IDS-105G-S1SC40D	1 x Simplex SC	-3.0	2.0	-23.0	-3.0	20.0	1490 / 1310	SMF	40 km (25 mi)
IDS-105G-S1SC80U	1 x Simplex SC	-2.0	3.0	-26.0	-3.0	24.0	1510 / 1590	SMF	80 km (50 mi)
IDS-105G-S1SC80D	1 x Simplex SC	-2.0	3.0	-26.0	-3.0	24.0	1590 / 1510	SMF	80 km (50 mi)
IDS-105G-S1SC120U	1 x Simplex SC	-3.0	2.0	-34.0	-9.0	31.0	1510 / 1590	SMF	120 km (74.6 mi)
IDS-105G-S1SC120D	1 x Simplex SC	-3.0	2.0	-34.0	-9.0	31.0	1590 / 1510	SMF	120 km (74.6 mi)

Operating Temperature (Ind) = -40°C to 75°C (-40 F to 167°F) All Models have 5 x 10/100/1000Base-T (RJ45) Connectors
Model	Choose your Fiber Connection from the table below 1000Base-X Simplex (BiDi) Fiber
	Fiber Connector	Transmit (dBm)		Receive (dBm)		Power Budget (dB)	Wavelength (nm) TX / RX	Fiber Type	Operating Distance
	Fiber Connector	Min	Max	Min	Max	Power Budget (dB)	Wavelength (nm) TX / RX	Fiber Type	Operating Distance
IDS-105G-S1SC10U-XT	1 x Simplex SC	-9.0	-3.0	-20.0	-3.0	11.0	1310 / 1490	SMF	10 km (6.2 mi)
IDS-105G-S1SC10D-XT	1 x Simplex SC	-9.0	-3.0	-20.0	-3.0	11.0	1490 / 1310	SMF	10 km (6.2 mi)

Industrial Ethernet Switch Accessories
Panel Mount kit PM3	Brackets for attaching 30 to 45 mm wide Perle IDS industrial switches inside a control panel or to a wall for wall.
Rack Mount Kit RM4U	Bracket for mounting one or more Perle DIN Rail switches in a standard 19” rack. Occupies “4U” of vertical rack space. 275 mm (10 inches) deep
UNO-PS/1AC/24DC/60W DIN-Rail Power Supply	UNO-PS/1AC/24DC/60W DIN-Rail Power Supply: 24 VDC, 60 Watt with universal 85 to 264 VAC, -25 to 70°C extended operating temperature. Power Supply Specifications.
UNO-PS/1AC/24DC/150W Power Supply	UNO-PS/1AC/24DC/150W Power Supply - DIN-Rail 24 VDC , 150 Watt power supply with universal 85 to 264 VAC, -25 to 70°C extended operating temperature. Power Supply Specifications.

IDS-105G with Standard DIN Rail

Click on image to see larger version

IDS-105G with Optional Wall/Panel Mount Brackets

Click on image to see larger version

IDS-105G Industrial Gigabit Switch Diagram

Single Mode / Single Strand (WDM) Fiber

Connecting devices over a single fiber strand (also referred to as “Bi-Directional” BiDi or Simplex)

To reduce costs, or where there are limits on available fiber, Wavelength-Division Multiplexing (WDM) technology may be utilized. WDM uses separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously. WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM).

When Single Strand fiber is used, you will need an “Up” side and a “Down” side when interconnecting fiber devices.

Perle offers a wide variety of Single Fiber (“Up/Down”) Ethernet Switches and Media Converters for use with single strand of fiber.

Installation Guides

IDS-105 & IDS-108 Unmanged Switches Visio Stencils (.vss)

IDS-105 & IDS-108 Unmanged Switches Visio Stencils (.vssx)

EU Declaration of Conformity

Industrial Switch FAQ Knowledgebase

Using Cisco SFPs in Perle Fiber Media Converters & Industrial Switches

SFP Optical Transceivers are interchangeable. Perle SFP Media Converters and Industrial Ethernet Switches enable a device to connect to a variety of fiber and copper cable types and distances.

MRP - Media Redundancy Protocol (IEC 62439-2)

Perle IDS Managed Switches support Media Redundancy Protocol (MRP), which is a standards-based protocol used in Ring topologies to avoid single points of failure by providing a recovery time of 10ms or less.

Lulworth Estate use Perle Industrial Switches to network smart parking meters

Lulworth Estate installed Perle Industrial Switches in the smart parking meters and connected via 10/100 fiber to the Estate central office. The IT Network Administrator is now able to monitor and manage the status of the parking meters remotely.

Navtech use Perle Industrial Switches & Media Converters in military airbourne surveillance system

Navtech Systems supplies airborne surveillance video downlinks globally, and secure, real-time transmission and distribution of data is crucial. Perle units are used in the network on the ground to access the imagery and data received from the aircraft. Perle products are high-quality, solid, secure, and reliable.

City of Colorado Springs use Perle Industrial Switches & Power Supplies in new surveillance installation

City of Colorado Springs Network Diagram

Great security cameras provide high-resolution video for catching criminals. Colorado Springs uses Perle PoE media converters and switches to help install high-quality IP cameras, even far from power sources.

Elsag® Fixed Plate Hunter ALPR System cameras powered by Perle PoE Switches

Diagram showing ALPR cameras powered by PoE Switches

Leonardo used Perle's IDS-105GPP switches for their Automatic License Plate Recognition (ALPR) systems. These rugged, fan-less switches provide reliable performance in extreme temperatures of -40░C to 75░C. ALPR systems use cameras mounted on highways, bridges, and tunnels to capture vehicle speed and license plates.

NBC Universal use Perle Industrial Switch and Media Converter to enable device control of Ethernet enabled satellite amplifiers greater than 300ft from a switch

NBC Universal Ethernet Extender Network Diagram

NBCUniversal use Perle Industrial Switch and Media Converter to gain device control of Ethernet enabled satellite amplifiers greater than 300ft from a switch. The setup is an inexpensive way to expand the network.

Deutsche Windtechnik replace unreliable commercial grade equipment with Perle Industrial Ethernet Switches and Device Servers to ensure reliable fault notification

Deutsche Windtechnik replace unreliable commercial grade Switches and Serial to Ethernet Servers with Industrial Grade products from Perle

CBK Engineering use Perle I/O Device Servers & Ethernet Switches to Develop Plug & Play Remote Alarm Multiplexers

Network diagram with digital inputs and outputs

In case of a power outage, UPS kicks-in providing back-up power to the Rockefeller Center, Two World Financial Center and the Pepsi Building

Central Bank of Nigeria use Perle Industrial Switches in CCTV Security Upgrade

Perle PoE Industrial Switches provided a reliable security solution to the Central Bank of Nigeria, with every component designed and tested to operate in extended temperature ranges. The switches are compliant to IEEE 802.3af/at and provide up to 30 watts of power to PDs.

The Scientific Workgroup for Rocketry and Spaceflight (WARR, Wissenschaftliche Arbeitsgemeinschaft fⁿr Raketentechnik und Raumfahrt) use an IOLAN Device Server to facilitate RS485 data transmission and conversion between onboard rocket flight computers and the ethernet ground infrastructure and monitoring software. Ethernet Extenders to solve the problem of transmitting data over 1000m between a control room and rocket launch pad. An Industrial PoE Switch supplies 30 watts of power to several IP cameras on a rocket launch pad and transmits important insights to the team of rocket scientists sitting in the ground control station.

WARR rocketry team is using a Perle Industrial PoE Switch, a pair of long-range Perle Ethernet Extenders, and a Perle extended temperature Serial Device Server Project Nixus in Rocket-Science Challenge.

German Research Center for Artificial Intelligence (DFKI, Deutsches Forschungszentrum fⁿr Kⁿnstliche Intelligenz) use Perle IRG Routers and IDS Switches for data transmission to create virtual reality (VR) environments

Take a closer look at the IRG Router and IDS Switch integrated into Valdemar

Valdemar runs on batteries, while the base station is solar or wind-powered. The Perle IRG Router's low power consumption and no SIM card recognition issues made it the best choice.

STELCO use Perle PoE Switches in new surveillance camera system

Diagram for PoE switches in security camera installations

Stelco chose Perle IDS switches to offer connectivity and power for security cameras. The switches work well because they are fan-less and provide high temp support for NEMA enclosures.

Engie Solutions use Perle PoE Switches to Remotely Reboot attached Surveillance Cameras

Diagram for PoE Switches in Engie Security Camera Application

When surveillance cameras freeze or malfunction, Engie Solutions employs the Perle PoE Switch IDS-710HP-XT with IEEE802.3bt support to remotely reset the cameras.

The city of Charlotteville use Perle Industrial Switches to provide reliable connectivity in traffic light control system

Diagram for Optimizing Traffic Flow in the City of Charlotteville

Perle Industrial Switches provide reliable connectivity in traffic light control system and optimizing Traffic Flow in the City of Charlotteville. With support for gigabit speeds, and -40 F to 167░ F operating temperatures, the switches are reliable in extended temperature environments