INJ 1100-T DIN Rail PoE Injectors with electrical isolation
IEEE 802.3bt/at/af Mid-span Injector up to 60W
- 10/100/1000 Mbps
- Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices
- Provide 4 to 60 Watts of PoE power
- IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant
- Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3
- Extended supply voltage range of 18 V DC ... 57 V DC, redundant
- Safe shield connection to ground potential
- Optional Extended temperature range of -40°C to +75°C
- Electrical isolation of the internal power supply unit
INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.
Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.
With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
INJ 1000 PoE Injector Benefits
| DIN Rail Enclosure | Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets. |
|
Power Over Ethernet (PSE) |
Performs the Power Sourcing Equipment (PSE) function on 1 UTP port for IEEE 802.3af (up to 15.4 watts PoE), IEEE 802.3at (up to 30 watts PoE+) or IEEE802.3bt (up to 60 watts Hi-PoE) compliant devices. |
|
Electrical isolation of the internal power supply unit |
The supply voltage and Power over Ethernet port are electrically isolated. This provides optimum protection against short circuits in the data cables on the field side. The passive network isolator protects Ethernet devices from potential differences of up to 4 kV. 
|
|
Potential Separation |
Safe shield connection to ground potential |
|
On-board PoE Power Controller |
This PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices. Click here for more details |
|
Advanced Power Management |
|
Hardware Specifications: INJ 1100-T DIN Rail PoE Injectors
Serial interface
Interface 1
Ethernet
Connection method
RJ45 socket
Transmission length
100 m (including patch cables)
Power Connector
1:1
Basic functions
PSE/Midspan, compliant with IEEE 802.3af, at
Serial transmission speed
10/100/1000 Mbps
Output nominal voltage
54 V DC (PoE)
Output power
INJ 1100-T
27030098
30 W
INJ 1110-T
27030098
60 W
Maximum output power
INJ 1100-T
27030098
40 W
INJ 1110-T
27030098
75 W
Interface 2
Ethernet
Connection method
RJ45 CAT5e
Ambient conditions
Ambient temperature (storage/transport)
-40°C ... 85°C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
General
Electrical isolation
VCC // FE // PoE
Test voltage data interface/power supply
1.5 kV AC (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Mounting position
vertical
Net weight
324.72 g
Housing material
Plastic
Color
Gray
MTTF
(SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day))
INJ 1100-T
27030098
2342 Years
INJ 1110-T
27030098
3062 Years
MTTF
(SN 29500 standard, temperature 40°C, operating cycle 34.25 % (5 days a week, 12 hours a day))
INJ 1100-T
27030098
1167 Years
INJ 1110-T
27030098
1397 Years
MTTF
(SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day))
INJ 1100-T
27030098
467 Years
INJ 1110-T
27030098
558 Years
Conformance
CE-compliant
UL, USA
UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, USA/Canada
- Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
- Class I, Division 2, Groups A, B, C, D
UL, Canada
CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Standards and Regulations
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Type of test
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result
10 Hz ... 57 Hz, amplitude ±3.5 mm, 57 Hz ... 150 Hz, 5g
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result
30g for 11 ms, three shocks in each spatial direction
Type of test
Continuous shock according to EN 60068-2-27/IEC 60068-2-27
Test result
10g for 16 ms, 1000 shocks in each spatial direction
Standards/regulations
EN 61000-4-2
Contact discharge
± 6 kV (Test Level 3)
Indirect discharge
INJ 1100-T
27030098
± 6 kV
INJ 1110-T
27030098
Standards/regulations
EN 61000-4-3
Frequency range
80 MHz ... 3 GHz (Test Level 3)
Standards/regulations
EN 61000-4-4
Comments
Criterion B
Standards/regulations
EN 61000-4-5
Signal
- ± 1 kV (Data line, asymmetrical)
- ± 2 kV (I/O cable on field side only, asymmetric)
Standards/regulations
- EN 61000-6-4
- EN 61000-4-6
Frequency range
0.15 MHz ... 80 MHz
Conformance
CE-compliant
UL, USA
UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, USA/Canada
- Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
- Class I, Division 2, Groups A, B, C, D
UL, Canada
CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Noxious gas test
ISA-S71.04-1985 G3 Harsh Group A
Dimensions
Width
30.2 mm
Height
130 mm
Depth
120 mm
Note
Utilization restriction
1
Power supply
Nominal supply voltage
- 24 V DC
- 48 V DC
Supply voltage range
18 V DC ... 57 V DC
Max. current consumption
INJ 1100-T
27030098
- 2.1 A
- 1.4 A (24 V DC)
- 0.7 A (48 V DC)
INJ 1110-T
27030098
- 4.2 A
- 2.73 A (24 V DC)
- 1.34 A (48 V DC)
Power consumption
≤ 75 W
Protective circuit
Reverse polarity protection
Conductor cross section flexible max.
4.00 mm²
Conductor cross section flexible min.
0.75 mm²
Conductor cross section solid max.
4.00 mm²
Conductor cross section solid min.
0.75 mm²
Conductor cross section AWG max.
12
Conductor cross section AWG min.
20
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Application Diagrams
Easily Mount your PoE Injector on a DIN Rail
INJ 1100-T PoE Injector Dimensional drawing of Compact housing
INJ 1100-T PoE Injector Front View
Click on a part number for ordering information
Product Image
Product Description
Power Cord & Part No.
INJ 1100-T DIN Rail PoE Injector with electrical isolation: 30 W PoE+ compliant, two RJ45 sockets, 10/100/1000 Mbps, IP20, expanded temperature range of -40°C ... 75°C, potential separation
INJ 1110-T DIN Rail PoE Injector with electrical isolation: 60 W Type 3 Hi-PoE compliant, two RJ45 sockets, 10/100/1000 Mbps, IP20, expanded temperature range of -40°C ... 75°C, potential separation
