Perle SRS-1110-G DIN Rail Media Converters transparently connect UTP CAT5/6/7 copper to Gigabit dual or single fiber in electric utility and power substation environments. With an extended operating temperature range of -40°C to +75°C and advanced electrical certifications for IEC 61850-3, IEEE1613 and EN 61000-4-16, these fiber to Ethernet converters meet all requirements necessary to operate safely in the harsh electrical environments associated with power utility and substation deployments.

The SRS Media Converters are also designed to operate in hazardous industrial locations. With numerous certifications, including ATEX Class 1 Zone 2 and ANSI/ISA 12.12.01 Class 1 Division 2, you are ensured safe and reliable operation in locations where flammable gases, liquids or vapors are handled, processed or used.

  • Extend the data transmission distance of IP-based devices by connecting their 10/100/1000Base-T copper interface to Gigabit fiber.
  • Extend the distance of an existing industrial network by linking CAT5/6/7 cabling to multimode or single mode fiber.
  • Extend the distance between two copper-based devices or networks
  • Protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.

SRS-1110 Media Converters are also available with support for an SFP slot.

Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SRS-1110-G Rate Converting Media Converters the smart choice for IT professionals.

SRS-1110-G Fiber Media Converter Features: 10/100/1000Base-T to 1000Base-X

Fully designed to operate in extreme temperatures
  • Perle SRS-1110-G Industrial Media Converters only use components that are fully qualified and rated to operate in -40F to +167
  • There are other products on the market that claim to operate at -40°F to +167°F however, they use “commercial-grade” components that have not been qualified by the manufacturer (OEM) to operate at the claimed temperature ranges. When “commercial-grade” parts are exposed to extremely high or low temperatures, product failures are inevitable. For example, integrated circuits on the PCB overheat causing premature failures. Under-rated connectors do not allow for proper contact between the device and the cables. These failures eventually stop all data communications in these high and low temperature environments.
  • By choosing Perle you can be confident you will not be subjected to these failures.

DIN Rail Enclosure

 Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets.

Auto-Negotiation

The media converter supports auto negotiation. The 1000Base-X fiber interface negotiates according to 802.3 clause 37. The 1000Base-T negotiates according to 802.3 clause 28 and 40. The 1000Base-X will link up with its partner after the highest common denominator (HCD) is reached and the copper has linked up with its partner. The 1000Base-X will continue to cycle through negotiation transmitting a remote fault of offline (provided this is enabled through the switch setting) until the copper is linked up and the HCDs match.

The media converter supports auto-negotiation of full duplex, half duplex, remote fault, full duplex pause, asymmetric pause and Auto MDI-X.

Auto-MDIX

Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the copper ethernet interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair.

The media converter will adjust for up to 120ns of delay skew between the 1000Base-T pairs.
Smart Link Pass-Through When Smart Link Pass-Through mode is enable, the Ethernet copper port will reflect the state of the Ethernet fiber media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled.

Fiber Fault Alert

 With Fiber Fault Alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. If the 1000Base-X transmitter is off, as a result of this fault, it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This eliminates the possibility of lockouts that occur with some media converters. Applies only when fiber auto-negotiation is disabled.

Pause (IEEE 802.3xy)

 Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter supports pause negotiation on the 10/100/1000Base-T copper connection and 1000Base-X fiber connection.

Duplex

 Full and half duplex operation supported.

Jumbo Packets

 Transparent to jumbo packets up to 10KB.

VLAN

 Transparent to VLAN tagged packets.

Remote LoopBack

 Capable of performing a loopback on the 1000Base-X fiber interface.

Hardware Specifications: SRS-1110-G Media Converters

Power

Input Supply Voltage

Triple voltage 12 / 24 / 48 VDC (9.6 – 60 VDC) input supporting:

  • 2 x Terminal Block power input and
  • 1 x T-Bus power input

Current

0.09 A (@ 24VDC)

Power Consumption

2.16 watts (@ 24VDC)

Power Connector

Dual input Terminal Block and/or T-Bus

Indicators

Power / TST

This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink fast/slow when in Loopback test mode or hardware error.

Fiber link on / Receive activity (LKF)

  • On: Fiber link present.
  • Blinking slowly: Fiber link disabled because of copper link loss.
  • Blinking quickly: Fiber link present and receiving data.
  • Off: No fiber link present

Link Pass-Through (LKP)

  • On: Fiber link present.
  • Blinking slowly: Fiber link disabled because of copper link loss.
  • Blinking quickly: Fiber link present and receiving data.
  • Off: No fiber link present

10/100/1000 Copper Speed (SP)

  • Green: 1000 Mbps
  • Yellow: 100 Mbps
  • Off: 10 Mbps

Copper Link Activity (LK)

  • On: Copper link is present
  • Blinking quickly: Copper link receiving data

Switches - accessible by sliding the chassis open

dipswitch

Auto-Negotiation

Auto (Default-Up): In this mode of operation the media converter will negotiate Ethernet parameters on both the copper and the fiber connection. This will ensure the most optimal connection parameters will be in effect. If connecting to another Perle Gigabit Media Converter, this parameter should be set to Auto.

Off: Copper Negotiation should only be turned off, if the copper link partner does not support copper link negotiations.

Smart Link Pass-Through

Standard Mode (Default-Up): In this mode, with Fiber Negotiation set off, the links on the fiber and copper sides can be brought up and down independently of each other. A loss of link on either the fiber link or copper link can take place without affecting the other connection. However, if the Fiber Negotiation is set to Auto, then a loss of link on the copper side will result in a loss of link on the fiber side but not vice versa.

Smart Link Pass-Through: In this mode, the link state on one connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter.

Loopback

Disabled (Default-Up): The loopback feature is disabled. This is the normal position for regular operation. The switch must be set to this position for data to pass through the media converter.

Enabled: This is a test mode. All data received on the receive (RX) fiber connection is looped back to the transmit (TX) fiber connection. The state of the copper is not relevant and no data or link status is passed through to the copper side.

Fiber Fault Alert (FFA)

Enabled (Default-Up): In this mode, when Fiber negotiation is turned on, if the media converter detects a loss of fiber signal on the fiber receiver it will immediately disable its fiber transmitter signal. This notifies the fiber link partner that an error condition exists on the fiber connection. If the remote media converter is set up for FFA Enabled and the local media converter is set up with Smart Link Pass-Through, a loss of fiber link on either the transmit or receive line will be passed through to the local copper connection to notify the connected device. If the media converter has been set to Smart Link Pass-Through mode, the effect will be the same as FFA since the link loss on the fiber receiver will result in bringing down the copper link, which will in turn cause the transmit fiber link to be brought down.

Disabled: In this mode, the media converter will not monitor for fiber fault.

Duplex Mode

Auto (Default-Up): In this mode, when Fiber Negotiation has been turned off, the media converter will use this Duplex setting for its Ethernet parameter negotiation on the copper connection. In the Auto position, the media converter will advertise support for both Full and Half Duplex mode. The resultant negotiation will provide the most optimum connection.

Half: In this mode, the media converter will force the negotiation to Half Duplex mode

Copper Speed

100 (Default-Up): In this mode, when Auto Neg (copper) is set to off, the media converter will use this switch setting for its Ethernet copper speed connection.The media converter will force the speed to 100 Mbps.

10: The media converter will force the speed to 10 Mbps

Cables and Connectors

100Base-TX or 1000Base-T or 10/100/1000Base-T

  • RJ45 connector, 2 pair CAT 5 (UTP or STP) or better cable for 10/100 Mbp
  • RJ45 connector, 4 pair CAT 5 (UTP or STP) or better cable

Fixed Fiber or Small Form Factor Pluggable (SFP) slot

  • Dual multimode or single mode (Duplex) fiber - SC, ST
  • Single strand fiber (Simplex) – SC

Magnetic Isolation

1.5kv

Fiber Optic Cable

  • Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron
  • Single Mode: 9/125 micron (ITu-T 625)

Filtering

Filtering

1026 MAC Addresses

Frame Specifications

Buffer

1000 Kbits frame buffer memory

Size

  • Maximum frame size of 10,240 bytes -- Gigabit
  • Maximum frame size of 2048 bytes -- Fast Ethernet

Packet Transmission Characteristics

Bit Error Rate (BER)

<10 -12

Environmental Specifications

Operating Temperature

-40°C to 75°C (-40°F to 167°F)

Storage Temperature

-40°C to 85°C (-40°F to 185°F)

Operating Humidity

5% to 90% non-condensing

Storage Humidity

5% to 95% non-condensing

Operating Altitude

Up to 3,048 meters (10,000 feet)

Heat Output (BTU/HR)

7.37

MTBF (Hours)*

577,432 Hours
Calculation model based on MIL-HDBK-217-FN2 @ 30°C

Chassis

Molded plastic DIN Rail case with an IP20 ingress protection rating

Mounting

Din Rail Kit

Native

Product Weight and Dimensions

Weight

0.12 kg, 0.26 lbs

Dimensions

114 x 100 x 22.5mm, 4.5 x 3.9 x 0.88 inches

Packaging

Shipping Weight

0.17 kg, 0.37 lbs

Shipping Dimensions

145 x 105 x 30 mm, 5.7 x 4.1 x 1.2 inches

Regulatory Approvals

Substation & Hazloc

  • IEC 61850-3
  • IEEE1613
  • EN 61000-4-16
  • ATEX Class 1 Zone 2
  • ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D

Emissions

  • FCC 47 Part 15 Class A, EN55032 (CISPR32) Class A
  • EN55011 (CISPR11)
  • ICES-003
  • EN61000-6-4 (Emissions for industrial environments)
  • CISPR 32:2015/EN 55032:2015 (Class A)
  • CISPR 24:2010/EN 55024:2010
  • EN61000-3-2

Immunity

  • EN55026
  • EN 61000-4-2 (ESD)
  • EN 61000-4-3 (RS)
  • EN 61000-4-4 (EFT)
  • EN 61000-4-5 (Surge)
  • EN 61000-4-6 (CS)
  • EN 61000-4-8 (PFMF)
  • EN 61000-4-11
  • IEC/EN 61000-6-2 (General Immunity for Industrial Environments)

Safety

  • UL/EN/IEC 62368-1 (previously 60950-1)
  • CAN/CSA C22.2 No. 62368-1
  • UL/IEC 61010-1
  • UL/IEC 61010-2
  • CE

Laser Safety

  • EN 60825-1
  • Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.

Environmental

Reach, RoHS and WEEE Compliant

Other

  • ECCN: 5A991
  • HTSUS Number: 8517.62.0020
  • Perle Limited Lifetime Warranty

Select a Model to obtain a Part Number - SRS-1110-G DIN Rail Media Converters

Dual Fiber Models

Model Connector Type Transmit
(dBm)		 Receive
(dBm)		 Power
Budget
(dBm)		 Wavelength
(nm)		 Fiber
Type		 Core
Size
(um)		 Modal
Bandwidth
(MHz* Km)		 Operating
Distance
Min Max Min Max
SRS-1110-GSC05
Dual SC
1000Base-SX
-9.5
-4
-17
-3
7.5
850
MMF
62.5
160
220 m
(722 ft)
62.5
200
275 m
(902 ft)
50
400
500 m
(1,640 ft)
50
500
550 m
(1,804 ft)
50
2000
1000 m
(3281 ft)
SRS-1110-GST05
Dual ST
1000Base-SX
-9.5
-4
-17
-3
7.5
850
MMF
62.5
160
220 m
(722 ft)
62.5
200
275 m
(902 ft)
50
400
500 m
(1,640 ft)
50
500
550 m
(1,804 ft)
50
2000
1000 m
(3281 ft)
SRS-1110-GSC10
Dual SC
1000Base-LX/LH
-9.5
-3
-20
-3
10.5
1310
MMF*
62.5
500
550 m
(1,804 ft)
50
400
550 m
(1,804 ft)
50
500
550 m
(1,804 ft)
SMF
**
-
10 km
(6.2 mi)
SRS-1110-GST10
Dual ST
1000Base-LX/LH
-9.5
-3
-20
-3
10.5
1310
MMF*
62.5
500
550 m
(1,804 ft)
50
400
550 m
(1,804 ft)
50
500
550 m
(1,804 ft)
SMF
**
-
10 km
(6.2 mi)

Single Fiber Models

Model Connector Type Transmit
(dBm)		 Receive
(dBm)		 Power
Budget
(dBm)		 Wavelength
(nm)		 Fiber
Type		 Core
Size
(um)		 Modal
Bandwidth
(MHz* Km) 		Operating
Distance
Min Max Min Max
SRS-1110-GSC10U
Single SC
1000Base-BX-U
-9
-3
-20
-3
11
1310 / 1490
SMF
**
-
10 km
(6.2 mi)
SRS-1110-GSC10D
Single SC
1000Base-BX-D
-9
-3
-20
-3
11
1490 / 1310
SMF
**
-
10 km
(6.2 mi)

*A mode-conditioning adapter as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning adapter for 62.5-um fibers has a different specification from the mode-conditioning adapter for 50-um fibers.

**ITU-T G.652 SMF as specified by the IEEE 802.3z standard.

Part Number Media Converter Accessories
29029928 UNO-PS/1AC/24DC/60W DIN-Rail Power Supply: 24 VDC, 60 Watt with universal 85 to 264 VAC, -25 to 70°C extended operating temperature.
29043768 UNO-P/1AC/24DC/150W Power Supply - DIN-Rail 24 VDC , 150 Watt power supply with universal 85 to 264 VAC, -25 to 70°C extended operating temperature
28664918 TRIO-PS/1AC/48DC/5 DIN-Rail Power Supply: 48 VDC, 240 Watt with universal 85 to 264 VAC, 30 to 56V DC output range adjustable, -25 to 70°C extended operating temperature.
28665018 TRIO-PS/1AC/48DC/10 Power Supply - DIN-Rail 48 VDC , 480 Watt power supply with universal 85 to 264 VAC, 30 to 56V DC output range adjustable, -25 to 70°C extended operating temperature
22038528 ME225TBUS15/4P1SBK - TBUS DIN Rail Connector - Transmit power voltage and data across the bus. 4 parallel positions and 1 serial position. UL 8A / cUL 6A, 150 V. Width 22.5cm. Carton of 5. For use with SR and SRS DIN Rail Media Converters.

Application Diagrams

Gigabit to IP Cameras

Connect 10/100/1000 IP Cameras to Gigabit Backbone

Extend the reach to IP cameras using industrial fiber media converters. Security cameras are typically installed in remote locations where extremely high or low temperatures are a concern -- ceilings, rooftops, light poles, along fences, pipelines and transit routes.

Stand-alone Media Converters are placed at the remote end connecting cameras with copper interfaces to fiber optic cabling. The fiber can extend the distance up to 10 kilometers using single mode or multimode fiber back to a control center. A media converter chassis located in the data closet at the control center accepts the fiber signal, converts it, and connects to the copper equipment at the main site.

IP Cameras Diagram

Gigabit Fiber to Wireless Access Points

Connect 10/100/1000 Wireless Access Points to Gigabit Backbone

Extend the reach to wireless access points ( AP ) using fiber media converters. When a company deploys a wireless network, APs need to be set up throughout the facility to ensure complete coverage for reliability. The network manager will likely need to extend further than the 100 meters allowed by copper cable to reach many of the APs.

When APs are used in industrial environments Media Converters are placed at the remote end connecting APs with copper interfaces to fiber optic cabling. The fiber can extend the distance up to 10 kilometers using single mode or multimode fiber back to a control center. A media converter chassis located in the data closet at the control center accepts the fiber signal, converts it, and connects to the copper equipment at the main site.

DIN Rail to Wireless Access Points Diagram

Bridge 10/100 Devices to gigabit Backbone

Connect 10/100 devices to Gigabit Backbone

Industrial switches are often used in environments where extremely high or low temperatures are a concern. Devices in an industrial environment can be connected to a Gigabit backbone through the use of rate converting Industrial Media Converters.

10/100 Devices to gigabit Diagram

UTP Switch to Fiber Switch

Interconnect a UTP Switch with a Fiber Switch

A media converter can interconnect a UTP copper based Switch port to a remote switch that has integrated fiber.

UTP Switch over Fiber Diagram

Switch to Gigabit Server

Extend the network distance between a Switch and a File Server

Two Ethernet Media Converters can extend the distance between a Switch and a File Server across a fiber link up to 10Km in length.

Switch to File Server Diagram

Direct Connect - Long Distance

Direct Connection between two remote devices

With a pair of Media Converters two devices, such as file servers, can be connected up to 10km away across a fiber link.

Long Distance Diagram

Enterprise Infrastructure

Enterprise Infrastructure using Fiber Optics

Create a fiber infrastructure for your enterprise network without any wholesale replacement of existing copper-based equipment.

Ethernet Fiber Enterprise Diagram 1
Ethernet Fiber Enterprise Diagram 2

Single Mode / Single Fiber

Connect copper ports over a single fiber strand ( also referred to as “Bi-Directional” BiDi )

When Single Strand fiber is used, a pair of Single Fiber Media Converters is needed for the copper to fiber conversion. Perle Single Fiber Media Converters are also referred to as “Up/Down” models. For example the SRS-1110-GSC05U (“Up”) and SRS-1110-GSC05D (“Down”), shown below, must be used in pairs. An “Up” must be matched with a “Down” peer to deal with transmit and receive frequencies separately.

Single Mode Fiber Diagram

SRS-1110-GSC05USRS-1110-GSC05D


The majority of installations for single mode fiber media converters are of the “dual connector” or “dual fiber” type where one fiber connection is used for transmit, the other for receive. These are physically “crossed” to match up the Transmit/Receive links.

However, to reduce costs, or where there are limits on available fiber, WDM technology may be utilized. WDM uses separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously.

So remember, if Single Strand fiber is used, you will need an “Up” Media Converter on one side and a “Down” Media Converter on the other for copper to fiber conversion.

Perle offers a wide variety of Single Fiber (“Up/Down”) Media Converters to connect 10BaseT, Fast Ethernet and Gigabit to single fiber. Whether you need Managed or Unmanaged, Standalone or Modular Chassis Based, 20km or 120km, Perle has the right model to meet your fiber conversion requirement.

Single Mode / Single Strand (WDM) Fiber

Single Mode Fiber Diagram

WDM technology reduces costs and maximizes fiber usage by transmitting on separate frequencies within a single fiber that can carry multiple light wavelengths simultaneously without interference. WDM comes in two forms: conventional/coarse (CWDM) and dense (DWDM), which use different wavelength patterns.

Link Passthrough - Maintaining a Transparent Copper-Ethernet to Fiber Link

Fiber to Ethernet Converters

Understanding the need for an onboard processor in the media converter that continuously monitors the status of the links connected to its transceiver ports.

Media Converters enable Gigabit Ethernet over 2km Multimode fiber

Fiber to Ethernet Converters

Perle offers Gigabit Media Converters that enable Gigabit speeds across a multimode fiber link up to 2km in length to avoid the cost, complications, and lead times associated with the installation of new fiber.

Calculating and Understanding Optical Power Budgets

Fiber Media Converter

The steps explain how to keep the remaining available power budget number positive, so you can be assured that your fiber network will deliver the required performance over the life of the installation.

Lockheed Martin integrate Perle Fiber Media Converters

Media Converter Application Diagram for Lockheed Martin

Lockheed Martin moved sensitive equipment from harsh conditions to a Comms Room and replaced the PC with solid-state technology to handle the data imagery equipment using Perle's Media Converters for copper to fibre conversion for the network link.

York University use Perle Media Converters in Field Robotics Research Network

York University diagram

Perle Gigabit Media Converters provide fiber to copper conversion and POE+ to WLAN Access Points inside NEMA Weatherproof Enclosures.

Cambridge University selects Perle PoE+ Industrial Media Converters

Access point next to specially-designed lamp post housing unit

Perle PoE+ Industrial Media Converters enable over 30,000 connections at the Tour de France event.

Jorin and Perle Join Forces to Reduce Oil Pollution in the Water Supply

Device Server

Jorin upgraded to a Gigabit IP camera, needing a Rate Converting Media Converter. Perle Media Converters fulfilled connectivity, temperature, and size requirements and increased processing and transmission speeds, guaranteed reliability, and future-proofed the installation.

NBC Universal use Perle Industrial Switch and Media Converter to enable device control of Ethernet enabled satellite amplifiers greater than 300ft from a switch

NBC Universal Ethernet Extender Network Diagram

NBCUniversal use Perle Industrial Switch and Media Converter to gain device control of Ethernet enabled satellite amplifiers greater than 300ft from a switch. The setup is an inexpensive way to expand the network.

Golden Gate Bridge implements Perle Media Converters back to back to enable Gigabit Ethernet transmission of video feeds across Multimode (MM) Fiber

Golden Gate Bridge network diagram

Perle's gigabit media converters helped Golden Gate Bridge Highway & Transportation District double fiber distance without losing bandwidth. The cost-effective and reliable solution met all requirements for easy installation and effective use.

Mullglen install Perle Fiber Media Converters to remove EMI from Sonar Data Transmission

Mullglen Nedia Converters

Mullglen solved five years of unreliable sonar data transmission on fishing trawlers by installing Perle Fiber Media Converters, which eliminated EMI interference and enabled the use of a fiber network for transmission of sonar fish finder data.

PRG Gear use Perle PoE+ Media Converters for Coldplay Tour

PoE Media Converters power multiple video cameras

PRG Gear engineers rely on Perle Fiber Media Converters and PoE Mid-span Injectors to ensure reliable power and connectivity for concert tour equipment. These rugged devices are capable of withstanding fluctuating conditions.

Navtech use Perle Industrial Switches & Media Converters in military airbourne surveillance system

Drone Operators Navtech

Navtech Systems supplies airborne surveillance video downlinks globally, and secure, real-time transmission and distribution of data is crucial. Perle units are used in the network on the ground to access the imagery and data received from the aircraft. Perle products are high-quality, solid, secure, and reliable.

Stockton East Water District chooses Perle for fiber to Ethernet upgrade

Stockton

Stockton East Water District choose Perle for Fiber to Ethernet upgrade. Perle Media Converters connect a remote server room, over 2000 feet of multimode fiber, back to a main server room 1000Base-T Switch to improve network redundancy and reliability.

Gaming Innovation Group use Perle 10G Media Converters in Data Center

Diagram Igaming Cloud

Perle Media Converters facilitate Fiber to 10 GbE Copper Conversion at the GIG Data Center in Malta. They offer flexibility with different modules in one chassis and enable seamless and reliable connectivity for single mode and multimode equipment.

Sumitomo Metal Mining install Perle Media Converters to provide Fiber to Ethernet conversion in project to increase Internet Bandwidth

Fiber to Ethernet conversion in mountain top -20░F temperatures

To increase internet bandwidth, Sumitomo Metal Mining install Perle Media Converters to provide crucial Ethernet to Fiber conversion over Alaskan Mountain top in -20░F (-6░C) temperatures and over 12 inches of radial ice.

Creating a hybrid video surveillance system using Analog and IP Cameras

Diagram for Media Converters in Video Surveillance System

Dragon LNG installed Perle Fiber Media Converters to integrate new IP cameras into the existing surveillance system. Hybrid setup with analog cameras is flexible and scalable for more IP cameras in the future.

Pixact use Perle Media Converters to enable Real-time Visual Monitoring Process

Pixact cameras transmit images over CAT6

Pixact installed Perle Media Converters with SFP Optical Transceivers to connect 11 cameras to the fiber which are being used for product monitoring in a factory. The setup ensures reliable and real-time transfer of frames. The Perle Media Converters' rugged steel casing and ability to operate in extended temperatures made them the ideal choice.

ERH install Perle Media Converters in UK Smart Motorway

single mode single strand fiber

ERH upgraded 300 CCTV cameras in Wales with new HD Ethernet cameras. Perle media converters allowed multiple cameras to feed into a chassis unit for image transfer to the main network and video wall.

Priority Communications Select Perle Media Converters to Resolve Warehouse Ethernet Distance Limitations

Priority Communications Network Diagram

Installation of some multimode fiber and Perle Ethernet to Fiber Media Converters enabled the extension of the Ethernet network and improved network speed without any costly replacement of network infrastructure.

Enterprise Network fiber–optic deployment – Using Media Converters to unlock performance and reduce costs during upgrades

10/100/1000 to Gigabit

As the network upgrades are traditionally complex and expensive. Fiber to Copper Media Converters can simplify both of these issues for businesses and enable them to improve network performance.

Media Converters offer major benefits during Backhaul Network fiber-optic upgrades

Media Converters in Backhaul Network fiber-optic upgrades

Fiber to Ethernet Media Converters simplify the process by allowing businesses to use optical technologies to support high-bandwidth backhaul networks that connect to low-bandwidth Ethernet networks accessed by the end user.

Media Converters extend campus environment LANs

Media Converters in a Campus Environment Diagram

The use of chassis-based media converters is a cost effective means of providing fiber connectivity to enable long distance data transfer in campus networks.

Media Converters offer flexible expansion in Horizontal Networks

Fiber in Retail Application

Media Converters offer flexible expansion in Horizontal Networks. Media Converters ease the integration of fiber cabling to extend network distances avoid EMI disruptions and tighten data security

ISPs improve residential network performance through media conversion

Fiber in Residential Media Converter Diagram

ISPs improve residential network performance through media conversionby using media converters to integrate fiber-optic infrastructures and provide high-speed data services.

Media conversion can unlock the potential of Metropolitan Area Networks (MANs)

Metropolitan Area Network

Media Converters are essential for MAN deployment, facilitating seamless transition between the local Ethernet setup and the dark fiber. They enable consistent protocol handling during data transmissionresulting in significant performance enhancements over WAN systems.

Fiber to Ethernet can support large-scale retail networks

Integrating copper and fiber in a retail network

Integrating copper and fiber cabling in retail network environments

Avoiding common mistakes in fiber-optic network deployment

10/100/1000 to Gigabit

This is the first in a three-part series on major problems that can occur when businesses rush to deploy a fiber-optic cabling infrastructure.

Do I need an Ethernet Extender or a Media Converter?

Where to Start?

Understand when you need an Ethernet Extender or a Media Converter as they support a wide variety of protocols, data rates, and media types to integrate seamlessly into various network infrastructures.

Filter your options to find the right hardware for your application

Viewing 6 of 6 products

View Accessories

Click on a part number for ordering information

Product Image

Product Description

Power Cord & Part No.

SRS-1110-GSC05 | 10/100/1000 Industrial Media Rate Converter

SRS-1110-GSC05- 10/100/1000 Industrial Media Rate Converter: 10/100/1000BASE-T (RJ-45) [100 m/328 ft] to 1000BASE-SX 850nm multimode (SC) [550 m/1804 ft]. Ruggedized to IEC 61850-3/IEEE 1613, -40F to +167F (-40C to +75C) extended operating temperature support. DIN Rail case, terminal block (Combicon) power connector for external power source

SRS-1110-GST05 | 10/100/1000 Industrial Media Rate Converter

SRS-1110-GST05- 10/100/1000 Industrial Media Rate Converter: 10/100/1000BASE-T (RJ-45) [100 m/328 ft] to 1000BASE-SX 850nm multimode (ST) [550 m/1804 ft]. Ruggedized to IEC 61850-3/IEEE 1613, -40F to +167F (-40C to +75C) extended operating temperature support. DIN Rail case, terminal block (Combicon) power connector for external power source

SRS-1110-GSC10 | 10/100/1000 Industrial Media Rate Converter

SRS-1110-GSC10- 10/100/1000 Industrial Media Rate Converter: 10/100/1000BASE-T (RJ-45) [100 m/328 ft] to 1000BASE-LX/LH 1310 nm single mode (SC) [10 km/6.2 miles]. Ruggedized to IEC 61850-3/IEEE 1613, -40F to +167F (-40C to +75C) extended operating temperature support. DIN Rail case, terminal block (Combicon) power connector for external power source

SRS-1110-GST10 | 10/100/1000 Industrial Media Rate Converter

SRS-1110-GST10- 10/100/1000 Industrial Media Rate Converter: 10/100/1000BASE-T (RJ-45) [100 m/328 ft] to 1000BASE-LX/LH 1310 nm single mode (ST) [10 km/6.2 miles]. Ruggedized to IEC 61850-3/IEEE 1613, -40F to +167F (-40C to +75C) extended operating temperature support. DIN Rail case, terminal block (Combicon) power connector for external power source

SRS-1110-GSC10U | 10/100/1000 Industrial Media Rate Converter

SRS-1110-GSC10U- 10/100/1000 Industrial Media Rate Converter: 10/100/1000BASE-T (RJ-45) [100 m/328 ft] to 1000BASE-BX 1310nm TX / 1490nm RX single strand fiber, single mode (SC) [10 km/6.2 miles]. Ruggedized to IEC 61850-3/IEEE 1613, -40F to +167F (-40C to +75C) extended operating temperature support. DIN Rail case, terminal block (Combicon) power connector for external power source

SRS-1110-GSC10D | 10/100/1000 Industrial Media Rate Converter

SRS-1110-GSC10D- 10/100/1000 Industrial Media Rate Converter: 10/100/1000BASE-T (RJ-45) [100 m/328 ft] to 1000BASE-BX 1490nm TX / 1310nm RX single strand fiber, single mode (SC) [10 km/6.2 miles]. Ruggedized to IEC 61850-3/IEEE 1613, -40F to +167F (-40C to +75C) extended operating temperature support. DIN Rail case, terminal block (Combicon) power connector for external power source

Related Accessories

Accessory Image

Accessory Description

Part No.

ME225TBUS15/4P1SBK - TBUS DIN Rail Connector | Perle

Transmit power voltage and data across the bus. 4 parallel positions and 1 serial position. UL 8A / cUL 6A, 150 V. Width 22.5cm. Carton of 5. For use with SR and SRS DIN Rail Media Converters.

TRIO-PS/1AC/48DC/5 Power Supply Accessory |Perle

TRIO-PS/1AC/48DC/5 DIN-Rail Power Supply: 48 VDC, 240 Watt with universal 85 to 264 VAC, 30 to 56V DC output range adjustable, -25 to 70°C extended operating temperature.

TRIO-PS/1AC/48DC/10 Power Supply Accessory | Perle

TRIO-PS/1AC/48DC/10 Power Supply - DIN-Rail 48 VDC , 480 Watt power supply with universal 85 to 264 VAC, 30 to 56V DC output range adjustable, -25 to 70°C extended operating temperature

UNO-PS/1AC/24DC/60W Power Supply Accessory| Perle

UNO-PS/1AC/24DC/60W DIN-Rail Power Supply: 24 VDC, 60 Watt with universal 85 to 264 VAC, -25 to 70°C extended operating temperature.

UNO-PS/1AC/24DC/150W Power Supply Accessory | Perle

UNO-PS/1AC/24DC/150W Power Supply - DIN-Rail 24 VDC , 150 Watt power supply with universal 85 to 264 VAC, -25 to 70°C extended operating temperature

Hi!

Have a Question? Chat with a live Product Specialist!

Have a Question?

We can provide more information about our products or arrange for a price quotation.


email-icon Send an Email
contactus-icon Send an Email callus-icon Call Us
×

Send us an Email