10/100 Ethernet Copper Extenders
Extend Ethernet Links over Coax or Copper Wire
Perle Ethernet Extenders enable the transmission of 10Mbps or 100Mbps Ethernet data beyond 100m (328ft) -- the general maximum cable length for copper Ethernet cables. This is achieved by using advanced VDSL technology to transmit over single twisted pair (CAT5/6/7/8), coax, or any existing copper wiring previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV or CATV applications.
- Extend 10/100Base-TX Ethernet up to 3 km [1.9 mi]
- High-Speed: up to 200+ mbps aggregate bandwidth
- Operation in Unmanaged or Secure Managed Networks
- Transparent operation for all Ethernet protocols including 802.1Q VLAN packets, and IP video compression schemes
- Advanced Features: Link Pass-Through, Interlink Fault Feedback, Auto-MDIX and Loopback
- Supply up to 30 Watts PoE to attached devices
Perle 10/100/1000 Ethernet Extenders
eX-S110
Operate in 0°C to +50°C
- 1 or 4 RJ45 10/100 Ethernet ports
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Metal desktop / wall-mount chassis
eX-S110-XT
Operate in -40°C to +75°C
- 1 or 4 RJ45 10/100 Ethernet ports
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Metal desktop / wall-mount chassis
eX-SM110
For secure managed environments
- 1 RJ45 10/100/1000 Ethernet port
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Operate in 0°C to +50°C
eXP-S110 PoE
Supply up to 15.4W PoE in 0°C to +50°C
- 1 or 4 RJ45 10/100 PoE PSE ports
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Remotely reboot attached devices
- Also operates as a PoE Powered Device
eXP-S110-XT PoE
Supply up to 15.4W PoE in -40°C to +75°C
- 1 or 4 RJ45 10/100 PoE PSE ports
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Remotely reboot attached devices
- Also operates as a PoE Powered Device
eX-C110
Slide-in card for modular chassis system
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Operate in 0°C to +50°C
- Unmanaged
eX-CM110
Managed slide-in card for chassis system
- RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
- Operate in 0°C to +50°C
- Manage via SNMP, Telnet/SSH, HTTPS, or PerleVIEW
MCR1900 Modular Chassis
19-slot modular chassis system
- Fits a standard 19” or 23” rack – 2U height
- Redundant AC or 48v DC power supplies
- For use in Managed and Unmanaged environments
MCR200 Modular Chassis
2-slot modular chassis system
- High reliability with no internal fan
- Low-profile desktop / wall-mount chassis
- For use in Managed and Unmanaged environments
Extend Fast Ethernet over Fiber
Extend network distances up to 120km
- SFP, Dual fiber ST/SC/LC or Single fiber SC
- Multimode and Single Mode fiber
- Dual and Single fiber support (FX, LX, EX, ZX, BX)
Companies that use Perle Ethernet Extenders
Why Choose a Perle Ethernet Extender?
Link Error Detection & Recovery
Low-end Ethernet Extenders will always make the end-to-end network connection appear as up and running, even though it may be disconnected. Perle Ethernet Extenders have an on-board microcontroller to continuously monitor the status of the links. If there is a break or failure in the link, both end devices become aware and react accordingly.
Reliable Ethernet Extenders
Perle Ethernet Extenders only use high-end components from leading chip manufacturers to ensure product reliability. Most Ethernet Extender manufacturers do not publish their MTBF’s, but Perle is proud to publish the high MTBF rates on the Hardware Specs for each product. In addition, we provide the best-in-class Lifetime Warranty.
Industrial Temperature Grade
Many manufacturers only use commercial parts that will fail in environments with extremely high or low temperatures. Integrated PCB circuits will overheat and under-rated connectors will not allow for proper contact between the device and cables. To prevent this, every component used in Perle Industrial Temperature Ethernet Extenders has been designed and tested to handle operating temperatures between -40°C and 75°C.
Secure Ethernet Extenders
Perle Managed Ethernet Extenders support all AAA security services (TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA) used in corporate networks, as well as, SSH/SSL, SNMPv3, Telnet and HTTPS secure management sessions. And, PerleVIEW Central Management Platform simplifies configuration, administration, monitoring, and troubleshooting.
Technical Support
We have sales and technical support staff around the globe to support you. If you need help choosing the best Ethernet Extender for your application, we provide technical consultations by phone or email. And, even though Perle Ethernet Extenders are Plug-and-Play, post sales support is easy to contact.
Trust
Perle has been providing reliable device connectivity solutions since 1976. That’s over 40 years of experience that businesses around the globe have come to trust to deliver superior connectivity technology for mission critical applications.
Ethernet Extender Applications
PoE VoIP phone communication using cat3 cabling over 2km
330m Safety Perimeter Gigabit Ethernet extension over twisted pair
Extended Temperature Ethernet extension in Parking Garages
Connect Multiple Manufacturing Plants over a 2km radius
Connect IP CCTV cameras to networking closets at 5-star resorts
Bridge 250m data transmission distance at outdoor events
Route VoIP calls over disused copper cabling for crisp, clear telephone calls
Transmission speeds of 25Mbps reliably achieved over 1000m coax cable in pipelines
Convert Casino Serial Floors into High-Speed Floors
PoE Ethernet Extenders power Wireless Access Points (WAPs)
Ethernet Extenders penetrate WiFi proof elevator cabs at Healthcare facility
Reliable Ethernet extension to top of 1500ft cell phone tower
Coax to Ethernet Extenders
Do I need an Ethernet Extender or a Media Converter?
The quality of Ethernet Extender that you choose will affect the uptime of your network. Choose quality products. Choose Perle.