10/100/1000 Ethernet Copper Extenders

Extend Ethernet Links over Coax or Copper Wire

Perle Ethernet Extenders enable the transmission of 10Mbps, 100Mbps, or 1G Ethernet data beyond 100m (328ft) -- the general maximum cable length for copper Ethernet cables. This is achieved by using advanced VDSL technology to transmit over single twisted pair (CAT5/6/7/8), coax, or any existing copper wiring previously previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV or CATV applications.

Extend 10/100/1000Base-T network distances up to 3 km [1.9 mi]
High-Speed: up to 200+ mbps aggregate bandwidth
Operation in Unmanaged or Secure Managed Networks
Transparent operation for all Ethernet protocols including 802.1Q VLAN packets, and IP video compression schemes
Advanced features: Link Pass-Through, Interlink Fault Feedback, Auto-MDIX and Loopback
Supply up to 30 Watts PoE to attached devices

Get a quote

Perle 10/100/1000 Ethernet Extenders

eX-S1110

Operate in 0°C to +50°C

1 or 4 RJ45 10/100/1000 Ethernet ports
RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Metal desktop / wall-mount chassis

eX-S1110-XT

Operate in -40°C to +75°C

1 or 4 RJ45 10/100/1000 Ethernet ports
RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Metal desktop / wall-mount chassis

eX-SM1110

For secure managed environments

1 RJ45 10/100/1000 Ethernet port
RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Operate in 0°C to +50°C

eXP-S1110 PoE

Supply up to 15.4W PoE in 0°C to +50°C

1 or 4 RJ45 10/100/1000 PoE PSE ports
RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Remotely reboot attached devices
Also operates as a PoE Powered Device

eXP-S1110PE PoE+

Supply up to 30W PoE in 0°C to +50°C

1 or 4 RJ45 10/100/1000 PoE+ PSE ports
RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Remotely reboot attached devices
Also operates as a PoE Powered Device

eXP-S1110-XT PoE+

Supply up to 30W PoE in -40°C to +75°C

1 or 4 RJ45 10/100/1000 PoE PSE ports
RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Remotely reboot attached devices
Also operates as a PoE Powered Device

eR-S1110 Ethernet Repeater

Transmit an additional 100m over twisted pair

Rate conversion between 10Mbps, 100Mbps, and 1G network links
Operates as a PoE Powered Device
Operate in -10°C to +50°C

eX-C1110

Slide-in card for modular chassis system

RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Operate in 0°C to +50°C
Unmanaged

eX-CM1110

Managed slide-in card for chassis system

RJ45, BNC, or Terminal Block Interlink (VDSL2) connector
Operate in 0°C to +50°C
Manage via SNMP, Telnet/SSH, HTTPS, or PerleVIEW

MCR1900 Modular Chassis

19-slot modular chassis system

Fits a standard 19” or 23” rack – 2U height
Redundant AC or 48v DC power supplies
For use in Managed and Unmanaged environments

MCR200 Modular Chassis

2-slot modular chassis system

High reliability with no internal fan
Low-profile desktop / wall-mount chassis
For use in Managed and Unmanaged environments

Extend Ethernet over Fiber

Copper to Fiber Media Converters

Extend network distances up to 160km
SFP, Dual fiber ST/SC/LC or Single fiber SC Connectors
Multimode and Single Mode fiber
Dual and Single fiber (FX, LX, EX, ZX, BX)

Companies that use Perle Ethernet Extenders

Why Choose a Perle Ethernet Extender?

Link Error Detection & Recovery

Low-end Ethernet Extenders, will always make the end-to-end network connection appear as up and running, even though it may be disconnected. Perle Ethernet Extenders have an on-board microcontroller to continuously monitoring the status of the links. If there is a break or failure in the link, both end devices become aware and react accordingly.

Reliable Ethernet Extenders

Perle Ethernet Extenders only use high-end components from leading chip manufacturers to ensure product reliability. Most Ethernet Extender manufacturers do not publish their MTBF’s, but Perle is proud to publish the high MTBF rates on the Hardware Specs for each product. In addition, we provide the best-in-class Lifetime Warranty.

Industrial Temperature Grade

Many manufacturers only use commercial parts that will fail in environments with extremely high or low temperatures. Integrated PCB circuits will overheat and under-rated connectors will not allow for proper contact between the device and cables. To prevent this, every component used in Perle Industrial Temperature Ethernet Extenders has been designed and tested to handle operating temperatures between -40°C and 75°C.

Secure Ethernet Extenders

Perle Managed Ethernet Extenders support all AAA security services (TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA) used in corporate networks, as well as, SSH/SSL, SNMPv3, Telnet and HTTPS secure management sessions. And, PerleVIEW Central Management Platform simplifies configuration, administration, monitoring, and troubleshooting.

Technical Support

We have sales and technical support staff around the globe to support you. If you need help choosing the best Ethernet Extender for your application, we provide technical consultations by phone or email. And, even though Perle Ethernet Extenders are Plug-and-Play, post sales support is easy to contact.

Trust

Perle has been providing reliable device connectivity solutions since 1976. That’s over 40 years of experience that businesses around the globe have come to trust to deliver superior connectivity technology for mission critical applications.