QUINT4-PS/48-110DC/24DC/2.5/PT Power Supply
24V Industrial Power Supply, DC/DC converter
- 24V DC Output Voltage
- Adjustable Output Voltage Ranges: 24 to 28 V DC
- 2.5 Amps
- 60 Watts
- Wide DC input voltage ranges of 48 ... 110 V DC
If you need to efficiently produce a regulated output voltage from a source that may or may not be well controlled to a load that may or may not be constant, the QUINT4-PS/48-110DC/24DC/2.5PT Converter is for you. This DC to DC Converter provides a regulated DC voltage. It alters the voltage level, regenerates voltages at the end of long cables, or enables the creation of independent supply systems by means of electrical isolation. With all required safety certifications, ruggedized packaging, extended operating temperatures, high peak load capabilities and high isolation voltages, this QUINT Industrial DC to DC Converter is designed to meet the needs of your industrial application. The QUINT DC to DC converter uses leading technologies to increase safety and reliability:
- Preventive function monitoring warns against critical operating states before errors occur.
- The static power reserve enables difficult loads to be started reliably with up to 1.25 times the nominal current (POWER BOOST).
- Space-saving compact design for 120mm control boxes.
- Static boost up to 125% (PN) a sustained period
- Dynamic boost up to 200% (PN) for 4.9 s.
- Efficiency up to 92% and low power dissipation
Input voltage range
48 V DC ... 110 V DC -37,5 % ...+40 %
Mains buffering
- typ. 14 ms (48 V DC)
- typ. 17 ms (110 V DC)
Efficiency
- typ. 93.7 % (110 V DC)
Nominal output voltage (Un)
24 V DC
Setting range of the output voltage (USet)
24 V DC ... 28 V DC
Nominal output current (IN)
2.5 A
Static Boost (IStat.Boost)
3.125 A (≤ 40 °C)
Dynamic Boost (IDyn.Boost)
5 A (≤ 60 °C (4.9 s))
Derating
> 60 °C (2.5%/K of POut nom.)
Output power (PN)
60W
Output power (PStat.Boost)
75W
Output power (PDyn.Boost)
120W
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Residual ripple
< 20 mVPP
Electric strength of the insulation
- Type test (IEC/EN 61010-1): 2.6 kV AC
- Production test: 1.2 kV DC
MTBF (IEC 61709, SN 29500)
> 1200000 h (25 °C)
> 618000 h (40 °C)> 230000 h (60 °C)
Dimensions W/H/D
32 mm / 106 mm / 90 mm
Weight
0.24 kg
Standards and Regulations
Overvoltage category
- EN 61010-1 II (≤ 5000 m)
- EN 62477-1 III (≤ 2000 m)
Fire protection in rail vehicles
EN 45545-2 (HL3)
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Standard – Safety extra-low voltage
EC 61010-1 (SELV)
Degree of protection
IP20
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Ambient temperature (start-up type tested)
-40 °C
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Climatic class
3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)
< 15 Hz, ±2.5 mm amplitude; 15 Hz ... 100 Hz: 2.3 g 90 Min. (in accordance with IEC 60068-2-6)
Operating Temperature
(-25 ... +70 °C; > 60 °C, Derating: 2,5 %/K)
Fire protection in rail vehicles
EN 45545-2 (HL3)
Protective extra-low voltage
IEC 61010-1 (SELV)
Mains variation/undervoltage
EN 61000-4-29
UL Approvals
- UL Listed UL 61010-1
- UL Listed UL 61010-2-201
- UL 121201 & CSA C22.2 No. 213-17 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
SIQ
CB scheme (IEC 61010-1, IEC 61010-2-201)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
EMC requirements for noise emission
- EN 61000-6-3
- EN 61000-6-4
EMC requirements for noise immunity
- EN 61000-6-1
- EN 61000-6-2
EMC requirements for power supply
- EN 61850-3
- EN 61000-6-5
Conducted noise emission
- EN 55016
- EN 61000-6-3 (Class B)>
Noise emission
- Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply)
- EN 55016
- EN 61000-6-3 (Class B)
Electrostatic discharge
- Housing contact discharge: 8 kV (Test Level 4)
- Discharge in air: 15 kV (Test Level 4)
Electromagnetic HF field
- Frequency range: 80 MHz ... 1 GHz
- Test field strength: 20 V/m (Test Level 3)
- Frequency range: 1 GHz ... 6 GHz
- Test field strength: 10 V/m (Test Level 3)
Fast transients (burst)
- Input: 2 kV (Test Level 4 - asymmetrical)
- Output: 2 kV (Test Level 4 - asymmetrical)
- Signal: 2 kV (Test Level 4 - asymmetrical)
Surge voltage load (surge)
EN 61000-4-5
Conducted interference
- Input/Output: asymmetrical
- Frequency range: 0.15 MHz ... 80 MHz
- Voltage: 10 V (Test Level 3)
Part Number: 10667088
QUINT4-PS/48-110DC/24DC/2.5/PT Power Supply with Push-in technology, DIN rail mounting, output: 24VDC/2.5 A
Contact Perle Sales
Purchase from our E-Store
